Cable Saver Line Stopper Rubber Winch Stopper For Polaris ATV UTV

Description

Description
Features:
l
Compatible with steel cable or synthetic rope up to 1/2" in diameter. (1/2" cable opening diameter, Perfect fit) Fits for ATV UTV Winches.
l
With this hook stopper and line saver with your winch to protect all ATV / UTV aluminum hawses / synthetic ropes.
l
This hook stopper eliminates hook / fairlead rattle and chatter when going down the trail.
l
The hook saver protects the winch motor and gears from pulling the cable in too far and bottoming out on the rollers.
l
Keeps tension on the hook to protect the cable becoming loose.
l
Works with steel roller fairleads/ aluminum hawse airleads, steel cables or synthetic ropes.
l
This cable saver is made of rubber, very long lasting. Four screws are solid iron screw and these svrews purface covered Zinc.
l
It can effectively prevent oxidation and corrosion.
l
Please check the pictures for dimensions.
Installation instructions:
l
Take out the pin of your hook and take the hook off the cable.
l
Just install the rope or cable between the two halves, no need to take the sythentic rope sleeve or any lube for the steel cable, thanks to the two-pieces design.
l
Insert four bolts and tighten them up with the Allen wrench comes together in the package.
l
Put the hook back to the end of the cable or rope. contact the clutch and the shrink on the axle, until the hook is on the hook and the ball.
l
Please position the hook stopper at approx. 3/4 of the total line distance towards the hook while using your winch.
Package Includes:
1 X Winch Cable Hook Stopper(screws included)
1 X Allen Wrench
Warm tips:
If you are using steel cable, please wear gloves during installation to protect your hands.